https://ujcontent.uj.ac.za/vital/access/manager/Index ${session.getAttribute("locale")} 5 Influence of aluminium content on the microstructure and densification of spark plasma sintered nickel aluminium bronze https://ujcontent.uj.ac.za/vital/access/manager/Repository/uj:43551 Wed 18 Aug 2021 19:16:38 SAST ]]> Microstructural and electrochemical studies of spark plasma sintered multiwall carbon nanotubes reinforced TiO2eMnO2 based composite https://ujcontent.uj.ac.za/vital/access/manager/Repository/uj:43549 Tue 17 Aug 2021 22:58:32 SAST ]]> Processing of pure titanium containing titanium-based reinforcing ceramics additives using spark plasma sintering https://ujcontent.uj.ac.za/vital/access/manager/Repository/uj:24730 Tue 15 Aug 2017 09:23:39 SAST ]]> The role of graphite addition on spark plasma sintered titanium nitride https://ujcontent.uj.ac.za/vital/access/manager/Repository/uj:39803 Thu 22 Oct 2020 09:53:14 SAST ]]> High temperature oxidation resistance of Ni22Cr11Al bond coat produced by spark plasma sintering as thermal barrier coatings https://ujcontent.uj.ac.za/vital/access/manager/Repository/uj:21264 Thu 22 Aug 2019 21:29:56 SAST ]]> A comparative study of spark plasma sintering and hybrid spark plasma sintering of W-4.9ni-2.1Fe heavy alloy https://ujcontent.uj.ac.za/vital/access/manager/Repository/uj:20793 99.2%) close to the theoretical density. Phase, microstructure and mechanical properties evolution of W-Ni-Fe alloy during SPS and HSPS were studied. The microstructural evolution of the 60 mm alloys varied from the edge of the sample to the core of the sample. Results show that the grain size and the hardness vary considerable from the edge to the core of sintered sample of 60 mm sintered using conventional SPS compared to hybrid SPS. Similarly, the hardness also increased from the edge to the core. The 60 mm-HSPS alloy exhibit improved bending strength than the 60 mm-SPS, 1115 MPa and 920 MPa respectively, former being similar to the 30 mm-SPS and HSPS alloys. The intergranular fracture along the W/W grain boundary is the main fracture modes of W-Ni-Fe, however in the 60 mm-SPS alloy peeling of the grains was also observed which diminished the properties. The mechanical properties of SPS and HSPS 93W-4.9Ni-2.1Fe heavy alloys are dependent on the microstructural parameters such as tungsten grain size and overall homogeneity.]]> Thu 22 Aug 2019 20:12:48 SAST ]]> Fabrication and characterization of titanium-nickel-zirconia matrix composites prepared by spark plasma sintering https://ujcontent.uj.ac.za/vital/access/manager/Repository/uj:22773 Thu 06 Apr 2017 08:19:36 SAST ]]> Evaluation of microstructural and nanomechanical performance of spark plasma sintered TiFe-SiC reinforced aluminium matrix composites https://ujcontent.uj.ac.za/vital/access/manager/Repository/uj:38831 Thu 01 Oct 2020 13:02:14 SAST ]]> Influence of nanocrystalline nickel powder on oxidation resistance of spark plasma sintered Ni-17Cr6.5Co1.2Mo6Al4W7.6Ta alloy https://ujcontent.uj.ac.za/vital/access/manager/Repository/uj:40033 Mon 02 Nov 2020 11:39:09 SAST ]]> Effects of ternary metal additions on corrosion of spark plasma sintered Ni-Fe alloys in H2SO4 and NaCl https://ujcontent.uj.ac.za/vital/access/manager/Repository/uj:30039 Fri 26 Oct 2018 08:38:39 SAST ]]> Data on assessment and exploratory statistical correlation data analysis of sintered Nd :YAG laser welded 2507 duplex stainless steel https://ujcontent.uj.ac.za/vital/access/manager/Repository/uj:37493 Fri 04 Sep 2020 13:23:56 SAST ]]>