Characterizing the effect of processing parameters on the porosity of laser deposited titanium alloy powder
- Mahamood, Rasheedat M., Akinlabi, Esther Titilayo, Shukla, Mukul, Pityana, Sisa
- Authors: Mahamood, Rasheedat M. , Akinlabi, Esther Titilayo , Shukla, Mukul , Pityana, Sisa
- Date: 2014
- Subjects: Laser metal deposition , Medical implants , Porosity , Processing parameters , Titanium alloy
- Type: Article
- Identifier: uj:4739 , ISSN 2078-0966 , http://hdl.handle.net/10210/11725
- Description: Laser Metal Deposition (LMD) is an additive manufacturing technique that produces parts layer by layer directly from the Computer Aided Design (CAD) file. Highly customized parts with complex shapes such as medical implants can well be manufactured using the LMD process. LMD has been used to produce a wide range of patient specific (customized) parts. Porous parts are of particular importance as medical implants because they can potentially aid the healing process and proper integration of the implant with the body tissues. In this research porous samples of titanium alloy (Ti6Al4V) were produced using the LMD process. Spherical shaped Ti6Al4V powder of particle size ranging between 150 to 200 μm was used. The effect of laser power and scanning speed on the shape, size and degree of porosity of the deposited tracks was investigated. The results showed that as the laser power was increased and the scanning speed decreased, the degree of porosity was reduced. The size of the porosity was also found to reduce as the laser power was increased.
- Full Text:
- Authors: Mahamood, Rasheedat M. , Akinlabi, Esther Titilayo , Shukla, Mukul , Pityana, Sisa
- Date: 2014
- Subjects: Laser metal deposition , Medical implants , Porosity , Processing parameters , Titanium alloy
- Type: Article
- Identifier: uj:4739 , ISSN 2078-0966 , http://hdl.handle.net/10210/11725
- Description: Laser Metal Deposition (LMD) is an additive manufacturing technique that produces parts layer by layer directly from the Computer Aided Design (CAD) file. Highly customized parts with complex shapes such as medical implants can well be manufactured using the LMD process. LMD has been used to produce a wide range of patient specific (customized) parts. Porous parts are of particular importance as medical implants because they can potentially aid the healing process and proper integration of the implant with the body tissues. In this research porous samples of titanium alloy (Ti6Al4V) were produced using the LMD process. Spherical shaped Ti6Al4V powder of particle size ranging between 150 to 200 μm was used. The effect of laser power and scanning speed on the shape, size and degree of porosity of the deposited tracks was investigated. The results showed that as the laser power was increased and the scanning speed decreased, the degree of porosity was reduced. The size of the porosity was also found to reduce as the laser power was increased.
- Full Text:
Effect of scanning speed on material efficiency of laser metal deposited Ti6Al4V
- Akinlabi, Esther Titilayo, Mahamood, Rasheedat M., Shukla, Mukul, Pityana, Sisa
- Authors: Akinlabi, Esther Titilayo , Mahamood, Rasheedat M. , Shukla, Mukul , Pityana, Sisa
- Date: 2012
- Subjects: Laser Metal Deposition Process , Material efficiency , Titanium alloy , Laser scanning speed
- Type: Article
- Identifier: uj:5337 , ISSN 2010-3778 , http://hdl.handle.net/10210/8880
- Description: The study of effect of laser scanning speed on material efficiency in Ti6Al4V application is very important because unspent powder is not reusable because of high temperature oxygen pick-up and contamination. This study carried out an extensive study on the effect of scanning speed on material efficiency by varying the speed between 0.01 to 0.1m/sec. The samples are wire brushed and cleaned with acetone after each deposition to remove un-melted particles from the surface of the deposit. The substrate is weighed before and after deposition. A formula was developed to calculate the material efficiency and the scanning speed was compared with the powder efficiency obtained. The results are presented and discussed. The study revealed that the optimum scanning speed exists for this study at 0.01m/sec, above and below which the powder efficiency will drop.
- Full Text:
- Authors: Akinlabi, Esther Titilayo , Mahamood, Rasheedat M. , Shukla, Mukul , Pityana, Sisa
- Date: 2012
- Subjects: Laser Metal Deposition Process , Material efficiency , Titanium alloy , Laser scanning speed
- Type: Article
- Identifier: uj:5337 , ISSN 2010-3778 , http://hdl.handle.net/10210/8880
- Description: The study of effect of laser scanning speed on material efficiency in Ti6Al4V application is very important because unspent powder is not reusable because of high temperature oxygen pick-up and contamination. This study carried out an extensive study on the effect of scanning speed on material efficiency by varying the speed between 0.01 to 0.1m/sec. The samples are wire brushed and cleaned with acetone after each deposition to remove un-melted particles from the surface of the deposit. The substrate is weighed before and after deposition. A formula was developed to calculate the material efficiency and the scanning speed was compared with the powder efficiency obtained. The results are presented and discussed. The study revealed that the optimum scanning speed exists for this study at 0.01m/sec, above and below which the powder efficiency will drop.
- Full Text:
The role of transverse speed on deposition height and material efficiency in laser deposited titanium alloy
- Mahamood, Rasheedat M., Akinlabi, Esther Titilayo, Shukla, Mukul, Pityana, Sisa
- Authors: Mahamood, Rasheedat M. , Akinlabi, Esther Titilayo , Shukla, Mukul , Pityana, Sisa
- Date: 2013
- Subjects: Additive manufacturing , Laser metal deposition , Material efficiency , Titanium alloy
- Type: Article
- Identifier: uj:4895 , http://hdl.handle.net/10210/12609
- Description: The most commonly used aerospace titanium alloy, Ti6Al4V, was deposited on Ti6Al4V plate of dimension 72 x 72 x5mm. The laser power of 3 kW, powder flow rate of 1.44 g/min and gas flow rate of 4 l/min were used throughout the deposition process. The transverse/ scanning speed was varied between 0.005 to 0.095 m/sec according to established result of the preliminary study that produces full dense and pore free deposits. The mass of the deposited powder was obtained by weight the substrate before deposition and reweighing after deposition. The substrate and the deposits were thoroughly cleaned using wire brush and acetone to remove unmelted powder particles from the surface of the substrate and the deposit. The height and width of the deposits were measured with Venier Caliper and the material efficiencies were determined using developed equations. The effect of the scanning speed on the material efficiency and deposit height were extensively studied and the results showed that for the set of processing parameter used in this study the optimum scanning speed is approximately 0.045 m/sec.
- Full Text:
- Authors: Mahamood, Rasheedat M. , Akinlabi, Esther Titilayo , Shukla, Mukul , Pityana, Sisa
- Date: 2013
- Subjects: Additive manufacturing , Laser metal deposition , Material efficiency , Titanium alloy
- Type: Article
- Identifier: uj:4895 , http://hdl.handle.net/10210/12609
- Description: The most commonly used aerospace titanium alloy, Ti6Al4V, was deposited on Ti6Al4V plate of dimension 72 x 72 x5mm. The laser power of 3 kW, powder flow rate of 1.44 g/min and gas flow rate of 4 l/min were used throughout the deposition process. The transverse/ scanning speed was varied between 0.005 to 0.095 m/sec according to established result of the preliminary study that produces full dense and pore free deposits. The mass of the deposited powder was obtained by weight the substrate before deposition and reweighing after deposition. The substrate and the deposits were thoroughly cleaned using wire brush and acetone to remove unmelted powder particles from the surface of the substrate and the deposit. The height and width of the deposits were measured with Venier Caliper and the material efficiencies were determined using developed equations. The effect of the scanning speed on the material efficiency and deposit height were extensively studied and the results showed that for the set of processing parameter used in this study the optimum scanning speed is approximately 0.045 m/sec.
- Full Text:
Laser forming of titanium and its alloys – an overview
- Akinlabi, Esther Titilayo, Shukla, Mukul, Akinlabi, Stephen A.
- Authors: Akinlabi, Esther Titilayo , Shukla, Mukul , Akinlabi, Stephen A.
- Date: 2012
- Subjects: Titanium , Titanium alloy , Laser beam forming
- Type: Article
- Identifier: uj:5334 , ISSN 2070-3740 , http://hdl.handle.net/10210/8877
- Description: Laser beam forming is a novel technique developed for the joining of metallic components. In this study, an overview of the laser beam forming process, areas of application, the basic mechanisms of the laser beam forming process, some recent research studies and the need to focus more research effort on improving the laser-material interaction of laser beam forming of titanium and its alloys are presented.
- Full Text:
- Authors: Akinlabi, Esther Titilayo , Shukla, Mukul , Akinlabi, Stephen A.
- Date: 2012
- Subjects: Titanium , Titanium alloy , Laser beam forming
- Type: Article
- Identifier: uj:5334 , ISSN 2070-3740 , http://hdl.handle.net/10210/8877
- Description: Laser beam forming is a novel technique developed for the joining of metallic components. In this study, an overview of the laser beam forming process, areas of application, the basic mechanisms of the laser beam forming process, some recent research studies and the need to focus more research effort on improving the laser-material interaction of laser beam forming of titanium and its alloys are presented.
- Full Text:
- «
- ‹
- 1
- ›
- »