Mechanistic study on tertiary phosphine complexes of ruthenium as olefin metathesis catalysts.
- Authors: Oosthuizen, Sharon
- Date: 2008-05-15T13:28:00Z
- Subjects: Phosphine , Alkenes , Chemical kinetics , Reactivity (Chemistry) , Metathesis (Chemistry) , Ruthenium , Transition metal catalysts , Complex compounds synthesis
- Type: Thesis
- Identifier: http://ujcontent.uj.ac.za8080/10210/374346 , uj:1717 , http://hdl.handle.net/10210/405
- Description: Ruthenium carbene complexes, with the general structure, [LL’Ru=CHR], are commonly known as Grubbs type catalysts, named after the discoverer of these metathesis catalysts. The discovery was quite revolutionary, since the catalysts proved to be easy to handle, tolerant towards various functional groups and more stable with regard to air and water than previous transition metal catalysts. Another important advantage was that all types of olefin metathesis reactions could be initiated without the help of co-catalysts or promoters. Today Grubbs type catalysts find wide application in especially organic and synthetic chemistry. A well-known example is the SHOP-process which produces long chain -olefins, while other important applications include the synthesis of macro-cyclic and cyclic olefins. The current study involved experimental and theoretical work to investigate various aspects comprising synthetic procedures, reactivity, kinetics, geometry and electronic properties of the complexes. Results are discussed briefly in the following paragraphs. The first aim of the project was to synthesise a Grubbs type catalyst. Initial efforts were focused on the preparation of a first generation catalyst through various methods. This included modifying the reported method for the synthesis of [(PPh3)2Cl2Ru=CH-CH=CMe2] to yield [(PPh2Cy)2Cl2Ru=CHCH= CMe2] instead; a phosphine exchange reaction with the complex [(PPh3)2Cl2Ru=CH-CH=CMe2] and free phosphine PPh2Cy; and utilising the analogue arsine ligand, AsPh3, to synthesise [(AsPh3)2Cl2Ru=CHCH=CMe2]; but unfortunately no success was achieved. However, it was possible to synthesise a novel second generation Grubbs type catalyst, [(IMesH2)(PPh2Cy)Cl2Ru=CHPh], through the phosphine exchange reaction of [(IMesH2)(NC5H5)2Cl2Ru=CHPh] and PPh2Cy. The new complex was tested in kinetic reaction studies and phosphine exchange reactions. Results showed that [(IMesH2)(PPh2Cy)Cl2Ru=CHPh] was catalytically active for the ring closing metathesis of commercial diethyl diallylmalonate. The reaction was first order with regard to the olefin, contrary to the second order kinetic results reported for similar reactions catalysed by first generation Grubbs catalysts. The phosphine exchange reactions were very successful and a rate constant could be determined. The rate constant was independent of the free phosphine concentration and activation parameters had relatively large, positive values; results indicative of a dissociative mechanism. These findings are in correlation with literature reports. A kinetic investigation was done on the catalyst-olefin coordination involving the functionalized olefins vinyl acetate, allyl acetate and allyl cyanide; and the first generation Grubbs catalyst, [(PCy3)2Cl2Ru=CHPh]. A two-step rate law, similar to an interchange mechanism, was determined. Phobcat, [(PhobCy)2Cl2Ru=CHPh], is modified first generation Grubbs type catalyst with rigid bicyclic phosphine rings which was recently developed by the Sasol Homogeneous Metathesis Group. In the current study Phobcat was compared to Grubbs1-PCy3 in the cross metathesis reaction of 1-octene. Results showed that Phobcat was up to 60% more active and had a 5 hour longer lifetime than Grubbs 1-PCy3. Theoretical studies were done on the three functionalized olefins of the earlier experimental study to gain fundamental understanding of steric and electronic influences on these catalyst-olefin systems. Without exception, coordination via the heteroatom of the olefin was significantly more favourable than coordination via the double bond functionality. This result indicates that metathesis of these olefins is highly unlikely, since the stable heteroatom coordination will suppress the parallel Ru=C/C=C interaction which is compulsory for the metathesis reaction. Orbital studies highlighted the difference between coordination of acetate and cyanide, but no trend of an electronic nature could be recognised. , Prof. A. Roodt
- Full Text:
- Authors: Oosthuizen, Sharon
- Date: 2008-05-15T13:28:00Z
- Subjects: Phosphine , Alkenes , Chemical kinetics , Reactivity (Chemistry) , Metathesis (Chemistry) , Ruthenium , Transition metal catalysts , Complex compounds synthesis
- Type: Thesis
- Identifier: http://ujcontent.uj.ac.za8080/10210/374346 , uj:1717 , http://hdl.handle.net/10210/405
- Description: Ruthenium carbene complexes, with the general structure, [LL’Ru=CHR], are commonly known as Grubbs type catalysts, named after the discoverer of these metathesis catalysts. The discovery was quite revolutionary, since the catalysts proved to be easy to handle, tolerant towards various functional groups and more stable with regard to air and water than previous transition metal catalysts. Another important advantage was that all types of olefin metathesis reactions could be initiated without the help of co-catalysts or promoters. Today Grubbs type catalysts find wide application in especially organic and synthetic chemistry. A well-known example is the SHOP-process which produces long chain -olefins, while other important applications include the synthesis of macro-cyclic and cyclic olefins. The current study involved experimental and theoretical work to investigate various aspects comprising synthetic procedures, reactivity, kinetics, geometry and electronic properties of the complexes. Results are discussed briefly in the following paragraphs. The first aim of the project was to synthesise a Grubbs type catalyst. Initial efforts were focused on the preparation of a first generation catalyst through various methods. This included modifying the reported method for the synthesis of [(PPh3)2Cl2Ru=CH-CH=CMe2] to yield [(PPh2Cy)2Cl2Ru=CHCH= CMe2] instead; a phosphine exchange reaction with the complex [(PPh3)2Cl2Ru=CH-CH=CMe2] and free phosphine PPh2Cy; and utilising the analogue arsine ligand, AsPh3, to synthesise [(AsPh3)2Cl2Ru=CHCH=CMe2]; but unfortunately no success was achieved. However, it was possible to synthesise a novel second generation Grubbs type catalyst, [(IMesH2)(PPh2Cy)Cl2Ru=CHPh], through the phosphine exchange reaction of [(IMesH2)(NC5H5)2Cl2Ru=CHPh] and PPh2Cy. The new complex was tested in kinetic reaction studies and phosphine exchange reactions. Results showed that [(IMesH2)(PPh2Cy)Cl2Ru=CHPh] was catalytically active for the ring closing metathesis of commercial diethyl diallylmalonate. The reaction was first order with regard to the olefin, contrary to the second order kinetic results reported for similar reactions catalysed by first generation Grubbs catalysts. The phosphine exchange reactions were very successful and a rate constant could be determined. The rate constant was independent of the free phosphine concentration and activation parameters had relatively large, positive values; results indicative of a dissociative mechanism. These findings are in correlation with literature reports. A kinetic investigation was done on the catalyst-olefin coordination involving the functionalized olefins vinyl acetate, allyl acetate and allyl cyanide; and the first generation Grubbs catalyst, [(PCy3)2Cl2Ru=CHPh]. A two-step rate law, similar to an interchange mechanism, was determined. Phobcat, [(PhobCy)2Cl2Ru=CHPh], is modified first generation Grubbs type catalyst with rigid bicyclic phosphine rings which was recently developed by the Sasol Homogeneous Metathesis Group. In the current study Phobcat was compared to Grubbs1-PCy3 in the cross metathesis reaction of 1-octene. Results showed that Phobcat was up to 60% more active and had a 5 hour longer lifetime than Grubbs 1-PCy3. Theoretical studies were done on the three functionalized olefins of the earlier experimental study to gain fundamental understanding of steric and electronic influences on these catalyst-olefin systems. Without exception, coordination via the heteroatom of the olefin was significantly more favourable than coordination via the double bond functionality. This result indicates that metathesis of these olefins is highly unlikely, since the stable heteroatom coordination will suppress the parallel Ru=C/C=C interaction which is compulsory for the metathesis reaction. Orbital studies highlighted the difference between coordination of acetate and cyanide, but no trend of an electronic nature could be recognised. , Prof. A. Roodt
- Full Text:
Towards modification of Grubbs 1st and 2nd generation metathesis catalysts: synthesis of ruthenium building blocks
- Authors: Chonco, Zandile Hlengiwe
- Date: 2010-04-12T10:22:23Z
- Subjects: Metathesis (Chemistry) , Ruthenium compounds synthesis , Ligands , Catalysts
- Type: Thesis
- Identifier: uj:6772 , http://hdl.handle.net/10210/3182
- Description: M.Sc. , In this study, the pyrazolyl-based ligands were synthesised and used in the synthesise of new ruthenium pyrazolyl-based complexes. The ruthenium pyrazolyl-based complex 2.4 was tested as a catalyst for the self-metathesis reaction of 1-octene. The N^N ligands: 2-(3,5-dimethylpyrazol-1-ylmethyl)pyridine (L1) and 4-(3,5- dimethylpyrazol-1-ylmethyl)pyridine (L2) were prepared from the reaction of 2- picolyl chloride (for L1) and 4-(bromomethyl)pyridine (for L2) with 3,5- dimethylpyrazole. Reactions of L1 and L2 with [RuCl2(PPh3)3] and [RuCl3·3H2O] produced [2-(3,5-dimethyl-pyrazol-1-ylmethyl)pyridine) dichlorotriphenylphosphine]ruthenium (2.1) and bis[4-(3,5-dimethylpyrazol-1- ylmethyl)pyridine-trichloride]ruthenium (2.3), respectively. The N^O ligands: 2- (3,5-dimethylpyrazol-1-yl)ethanol (L3), 2-(3,5-diphenylpyrazol-1-yl)ethanol (L4), were prepared from the reaction of 2-hydroxyethylhydrazine (for L3) and dibenzoylmethane (for L4) with 2-hydroxyethylhydrazine. Reaction of L3 with (3-phenylindenylidene)dichlorobis-(triphenylphosphine)ruthenium produced [3-phenylindenylidene-(3,5-dimethylpyrazol-1-yl)-ethanolate chlorotriphenylphosphine]ruthenium (2.4). Ligands, 2-(3,5-dimethylpyrazol-1-ylmethyl)-phenol (L5) and bis(3,5- dimethylpyrazol-1-yl)acetic acid (L6), were prepared from the reaction of o-(α- bromo-methyl) phenyl methanesulfonate (for L5) and dibromoacetic acid (for L6) with 3,5-dimethylpyrazole. Reaction of L6 with [RuCl2(PPh3)3] produced bis-[(3,5-dimethylpyrazol-1-yl)-acetic-acid-chloro(bistriphenylphosphine)] ruthenium (2.6). The C^N ligands: 1-[2-(3,5,-dimethylpyrazol-1-yl)-ethyl]-3- methyl-3H-imidazol-1-ium bromide (L7) and 1-[2-(3,5,-dimethylpyrazol-1-yl)- ethyl]-3-methyl-3H-imidazol-1-ium bromide (L8) were prepared from the reaction of 1-(2-bromoethyl)-3,5-dimethyl-1H-pyrazole (for L7) and 1-(2- bromoethyl)-1H-pyrazole (for L8) with 1-methylimidazole. Reactions of L7 and L8 with silver(I) oxide (Ag2O) produced 3,5-dimethyl-1-[2-(3-methyl-2,3- dihydro-imidazol-1-yl)-ethyl-1H-pyrazole]silver bromide (2.7) and 1-[2-(3- methyl-2,3-dihydro-imidazol-1-yl)-ethyl-1H-pyrazole]silver bromide (2.8), respectively. Reactions of silver complexes (2.7) and (2.8), respectively, with [RuCl2(PPh3)3] produced 3,5-dimethyl-1-[2-(3-methyl-2,3-dihydro-imidazol-1- yl)-ethyl-1H-pyrazole-dichloro(triphenylphosphine)]ruthenium (2.9) and 1-[2- (3-methyl-2,3-dihydro-imidazol-1-yl)-ethyl-1H-pyrazoledichloro (triphenylphosphine)]ruthenium (2.10). The synthesised complexes were obtained in moderate to low yields and were characterised by 1H, 13C{1H}, 31P{1H} NMR, IR spectroscopy, mass spectrometry, elemental analyses and ligand L5 was also characterised by X-ray crystallography. Complex 2.4 was screened for self-metathesis reaction of 1-octene. Initial run from 30-90 oC showed no activity for 1-octene metathesis below 105 oC. At 105 oC small amounts of 7-tetradecene was obtained, indicating that metathesis reaction occurs at very high temperatures (105 oC). Thermal stability test of complex 2.4, showed that rearrangement in the proposed structure of complex 2.4 occurs after heating at 90 oC for 16 h, this was evident by the 31P{1H} NMR spectrum of complex 2.4 obtained as a singlet at 28.9 ppm (after being heated), (complex 2.4 appears at 30.0 ppm before heating). From the 31P{1H} NMR study, it could be proposed, that the pyrazole arm of the ligand dissociates thus influencing the environment of the phosphorus (of the triphenylphosphine), and therefore a shift in the peaks is observed.
- Full Text:
- Authors: Chonco, Zandile Hlengiwe
- Date: 2010-04-12T10:22:23Z
- Subjects: Metathesis (Chemistry) , Ruthenium compounds synthesis , Ligands , Catalysts
- Type: Thesis
- Identifier: uj:6772 , http://hdl.handle.net/10210/3182
- Description: M.Sc. , In this study, the pyrazolyl-based ligands were synthesised and used in the synthesise of new ruthenium pyrazolyl-based complexes. The ruthenium pyrazolyl-based complex 2.4 was tested as a catalyst for the self-metathesis reaction of 1-octene. The N^N ligands: 2-(3,5-dimethylpyrazol-1-ylmethyl)pyridine (L1) and 4-(3,5- dimethylpyrazol-1-ylmethyl)pyridine (L2) were prepared from the reaction of 2- picolyl chloride (for L1) and 4-(bromomethyl)pyridine (for L2) with 3,5- dimethylpyrazole. Reactions of L1 and L2 with [RuCl2(PPh3)3] and [RuCl3·3H2O] produced [2-(3,5-dimethyl-pyrazol-1-ylmethyl)pyridine) dichlorotriphenylphosphine]ruthenium (2.1) and bis[4-(3,5-dimethylpyrazol-1- ylmethyl)pyridine-trichloride]ruthenium (2.3), respectively. The N^O ligands: 2- (3,5-dimethylpyrazol-1-yl)ethanol (L3), 2-(3,5-diphenylpyrazol-1-yl)ethanol (L4), were prepared from the reaction of 2-hydroxyethylhydrazine (for L3) and dibenzoylmethane (for L4) with 2-hydroxyethylhydrazine. Reaction of L3 with (3-phenylindenylidene)dichlorobis-(triphenylphosphine)ruthenium produced [3-phenylindenylidene-(3,5-dimethylpyrazol-1-yl)-ethanolate chlorotriphenylphosphine]ruthenium (2.4). Ligands, 2-(3,5-dimethylpyrazol-1-ylmethyl)-phenol (L5) and bis(3,5- dimethylpyrazol-1-yl)acetic acid (L6), were prepared from the reaction of o-(α- bromo-methyl) phenyl methanesulfonate (for L5) and dibromoacetic acid (for L6) with 3,5-dimethylpyrazole. Reaction of L6 with [RuCl2(PPh3)3] produced bis-[(3,5-dimethylpyrazol-1-yl)-acetic-acid-chloro(bistriphenylphosphine)] ruthenium (2.6). The C^N ligands: 1-[2-(3,5,-dimethylpyrazol-1-yl)-ethyl]-3- methyl-3H-imidazol-1-ium bromide (L7) and 1-[2-(3,5,-dimethylpyrazol-1-yl)- ethyl]-3-methyl-3H-imidazol-1-ium bromide (L8) were prepared from the reaction of 1-(2-bromoethyl)-3,5-dimethyl-1H-pyrazole (for L7) and 1-(2- bromoethyl)-1H-pyrazole (for L8) with 1-methylimidazole. Reactions of L7 and L8 with silver(I) oxide (Ag2O) produced 3,5-dimethyl-1-[2-(3-methyl-2,3- dihydro-imidazol-1-yl)-ethyl-1H-pyrazole]silver bromide (2.7) and 1-[2-(3- methyl-2,3-dihydro-imidazol-1-yl)-ethyl-1H-pyrazole]silver bromide (2.8), respectively. Reactions of silver complexes (2.7) and (2.8), respectively, with [RuCl2(PPh3)3] produced 3,5-dimethyl-1-[2-(3-methyl-2,3-dihydro-imidazol-1- yl)-ethyl-1H-pyrazole-dichloro(triphenylphosphine)]ruthenium (2.9) and 1-[2- (3-methyl-2,3-dihydro-imidazol-1-yl)-ethyl-1H-pyrazoledichloro (triphenylphosphine)]ruthenium (2.10). The synthesised complexes were obtained in moderate to low yields and were characterised by 1H, 13C{1H}, 31P{1H} NMR, IR spectroscopy, mass spectrometry, elemental analyses and ligand L5 was also characterised by X-ray crystallography. Complex 2.4 was screened for self-metathesis reaction of 1-octene. Initial run from 30-90 oC showed no activity for 1-octene metathesis below 105 oC. At 105 oC small amounts of 7-tetradecene was obtained, indicating that metathesis reaction occurs at very high temperatures (105 oC). Thermal stability test of complex 2.4, showed that rearrangement in the proposed structure of complex 2.4 occurs after heating at 90 oC for 16 h, this was evident by the 31P{1H} NMR spectrum of complex 2.4 obtained as a singlet at 28.9 ppm (after being heated), (complex 2.4 appears at 30.0 ppm before heating). From the 31P{1H} NMR study, it could be proposed, that the pyrazole arm of the ligand dissociates thus influencing the environment of the phosphorus (of the triphenylphosphine), and therefore a shift in the peaks is observed.
- Full Text:
Green synthesis of silver and platinum nanostructures using water hyacinth plant leave extract
- Authors: Anyik, John Leo
- Date: 2017
- Subjects: Nanostructured materials , Green chemistry , Metathesis (Chemistry) , Water-soluble organometallic compounds
- Language: English
- Type: Masters (Thesis)
- Identifier: http://hdl.handle.net/10210/244024 , uj:25231
- Description: M.Sc. (Chemistry) , Abstract: An eco-friendly synthesis of silver (Ag) and platinum (Pt) nanoparticles (NPs) using aqueous extracts from both fresh and dried leaves of water hyacinth plant as efficient reducing and stabilizing agents is presented. The optical properties of the as-synthesised material from both extracts were studied at different pH and reaction time and were characterized using UV-visible, transmission electron microscopy (TEM), Fourier Transform infra-red spectroscopy (FTIR), Dynamic light scattering (DLS), X-ray diffraction (XRD) and energy dispersive X-ray analysis (EDX). The colour changes from light yellow to brown with the presence of the silver surface plasmon resonance (SPR) band indicated the formation of Ag-NPs while the disappearance of the peak intensity at 260 nm confirmed the formation of Pt-NPs. TEM analysis showed that the as-synthesised materials from both extracts were of different sizes and spherical in shape while DLS analysis revealed their hydrodynamic sizes in the hydrated state. FTIR indicated that, the presence of polyphenols, alkaloids and polysaccharides groups present in both water hyacinth leaf extract were responsible for the reduction and capping of Ag-NPs and Pt-NPs. The presence of elemental silver as well as platinum and the purity of the as-synthesised sample were confirmed by EDS analysis. This study demonstrates the feasibility of using water hyacinth leaf extract from fresh and dried leaves for the synthesis of Ag-NPs and Pt-NPs. However, fresh leaves extract was more preferred than dried leaves extract as it retains most of the phytochemicals that could influence the formations of the nanoparticles. The as-synthesised materials were further used for colorimetric sensing of heavy metals in aqueous solution (Hg2+, Ca2+, Cr3+, Ba2+ Li+, K+, Ni2+, Co2+, Pb2+, Mn2+) and only Ag-NPs shows a sensitive response towards these metal ions as indicated by the shift in the position of the surface plasmon resonance (SPR) band with a more selective response to Hg2+. Pt-NPs on the other hand show no response towards these metal ions and hence cannot act as a colorimetric probe...
- Full Text:
- Authors: Anyik, John Leo
- Date: 2017
- Subjects: Nanostructured materials , Green chemistry , Metathesis (Chemistry) , Water-soluble organometallic compounds
- Language: English
- Type: Masters (Thesis)
- Identifier: http://hdl.handle.net/10210/244024 , uj:25231
- Description: M.Sc. (Chemistry) , Abstract: An eco-friendly synthesis of silver (Ag) and platinum (Pt) nanoparticles (NPs) using aqueous extracts from both fresh and dried leaves of water hyacinth plant as efficient reducing and stabilizing agents is presented. The optical properties of the as-synthesised material from both extracts were studied at different pH and reaction time and were characterized using UV-visible, transmission electron microscopy (TEM), Fourier Transform infra-red spectroscopy (FTIR), Dynamic light scattering (DLS), X-ray diffraction (XRD) and energy dispersive X-ray analysis (EDX). The colour changes from light yellow to brown with the presence of the silver surface plasmon resonance (SPR) band indicated the formation of Ag-NPs while the disappearance of the peak intensity at 260 nm confirmed the formation of Pt-NPs. TEM analysis showed that the as-synthesised materials from both extracts were of different sizes and spherical in shape while DLS analysis revealed their hydrodynamic sizes in the hydrated state. FTIR indicated that, the presence of polyphenols, alkaloids and polysaccharides groups present in both water hyacinth leaf extract were responsible for the reduction and capping of Ag-NPs and Pt-NPs. The presence of elemental silver as well as platinum and the purity of the as-synthesised sample were confirmed by EDS analysis. This study demonstrates the feasibility of using water hyacinth leaf extract from fresh and dried leaves for the synthesis of Ag-NPs and Pt-NPs. However, fresh leaves extract was more preferred than dried leaves extract as it retains most of the phytochemicals that could influence the formations of the nanoparticles. The as-synthesised materials were further used for colorimetric sensing of heavy metals in aqueous solution (Hg2+, Ca2+, Cr3+, Ba2+ Li+, K+, Ni2+, Co2+, Pb2+, Mn2+) and only Ag-NPs shows a sensitive response towards these metal ions as indicated by the shift in the position of the surface plasmon resonance (SPR) band with a more selective response to Hg2+. Pt-NPs on the other hand show no response towards these metal ions and hence cannot act as a colorimetric probe...
- Full Text:
- «
- ‹
- 1
- ›
- »