List of Titles

The influence of angle and aspect on the established vegetative cover on the slopes of rehabilitated coal discard dumps in Mpumalanga

- Bloy, Steven Douglas

Authors: Bloy, Steven Douglas
Date: 2009-02-09T09:17:00Z
Subjects: Restoration ecology , Abandoned mined lands reclamation , Coal mines and mining , Mpumalanga (South Africa)
Type: Thesis
Identifier: uj:8124 , http://hdl.handle.net/10210/2099
Description: M.Sc. , The decommissioning of mines and mining-related activities brings about the onset of rehabilitation. A legacy that most coal mines must address is the rehabilitation of the coal discard dumps that are generated by the beneficiation process of the raw coal. Rehabilitation involves the shaping and covering with a topsoil layer of these coal discard dumps. The topsoil layer is then revegetated to provide a stable form of protection against erosion. Considerations taken into account regarding the rehabilitation of coal discard dumps include the final slope angle, physical constraints i.e. railways or rivers, a source of topsoil and the grass species to be sown. Once the dump has been shaped, capped and seeded, regular applications of fertilizer take place for a defined period of time. This is to accelerate the growth of the grasses, as well as to stabilise the nutrient levels in the topsoil capping. Ingwe Mine Closure Operations (MCO), part of Ingwe Collieries Limited, is the business unit entrusted with the management and successful rehabilitation of Ingwe’s defunct operations. All of the coal discard dumps sampled in this study are found on such defunct operations. These coal discard dumps have been rehabilitated to a very high standard by MCO, and in most cases exceed the minimum requirements stipulated by law and guideline documents. This study and the results obtained from it reflect this. This study investigated, in terms of defined types of cover, whether or not there is a statistically significant difference between the: • six coal discard dumps from which data were collected; • five different defined slope aspects; • two groups of slope angles; and • slope angle and slope aspect in terms of cover. The data collected was analysed statistically, so as to determine whether significant differences (95 percentile confidence level), in terms of cover, exist. The purpose of this was to determine whether or not a preferred slope aspect or slope angle group could be identified for the six coal discard dumps sampled. By identifying a preferred slope aspect or slope angle group, companies could alter the design of operational or defunct dumps so as to maximise these. This would make the rehabilitation of the dump more sustainable and could possibly reduce aftercare costs. Through statistical analysis of the data collected it was determined that: • of the six coal discard dumps sampled, significant differences did exist between some of the dumps regarding basal cover, plant litter cover and bare ground. As each dump is different with its own specific micro-climate, this can be expected. The age of the dumps could also have played a role in terms of development; • of the five different defined slope aspects analysed, no significant differences existed between any of them; • of the two groups of slope angles analysed, no significant difference existed between them; and • no relationship between slope angle and slope aspect, in terms of cover, could be established. The analysis of the data collected was done by means of ANOVA one-way tests, coupled with Post Hoc Tests and Contrast Tables. The results of the statistical analysis were evaluated by the STATCON Department of the Rand Afrikaans University for accuracy. The data and the statistical analysis thereof were found to be satisfactory and correct. Various other statistical analyses were conducted on the data, but the results obtained from these tests were all the same as that of the original data analysis. These analyses included the Univariate Analysis of Variance, T-tests and Mann-Whitney tests.
Full Text:

Quick View

A review of the coalbed methane potential of South Africa's coal deposits and a case study from the north-eastern Karoo basin

- Sandersen, Andrea

Authors: Sandersen, Andrea
Date: 2012-03-06
Subjects: Coalbed methane , Coal mines and mining , Economic geology
Type: Thesis
Identifier: uj:2144 , http://hdl.handle.net/10210/4510
Description: M.Sc. , The potential target areas for coalbed methane in South Africa are reviewed and a case study based on borehole data from the north-eastern Karoo basin was undertaken. The Early Permian coal seams of the Karoo Supergroup occur in several discrete sedimentary basins in South Africa, of which the Karoo basin is the largest. Using screening criteria based on geological, petrographical and analytical data some of the coal deposits can be excluded as potential coalbed methane producers. These include the Molteno Coalfield, large parts of the Karoo basin coal deposits and some of the Northern Province's coal deposits which are structurally disturbed. The traditional mining areas in the Free State, Witbank and Highveld coalfields are excluded from the coalbed methane study because the target seams occur at less than 200 metres below surface, too shallow for gas retention. Some of the coal seams in the Waterberg Coalfield occur at depths of several hundred metres below surface and these are unlikely to be mined by conventional means. These deep coals may be ideal coalbed methane producers. This regional overview was based on available, published data and two important parameters, permeability of coal and coalbed hydrology are unknown but important factors that will need to be taken into account in any future evaluations. The case study focused on an area close to Amersfoort that has a predicted potential for coalbed methane production. The study utilized 465 borehole descriptions from which isopach maps and geological cross-sections were constructed. Limited samples of borehole core provided lithological information from which a facies analyses was undertaken so as to establish the hydrodynamic origin of each facies types. The main lithofacies associated with the coal seams are mudstones, carbonaceous shales and fine- to coarse-grained sandstone. These data were combined with analyses from limited permeability data, petrographical data and proximate analyses for the Gus and Alfred seams. In addition to the sedimentary rocks, the role of dolerite intrusions was found to be significant as these occur as thick sills and dykes that occur below, within and above the coal seams. These may compartmentalize the seams into secondary targets within the study area. Thick sills overlying the coal zone also increase static loading and may be advantageous with respect to reducing the minimum depthbelow- surface requirements. Potential coalbed methane target areas are identified, although the entire study area is not suitable due to structural displacement of the coal seams, thinning of coal in places and devolatization caused by the dolerites.
Full Text:

Quick View

Conceptual development of a centralised support function to facilitate the successful implementation of a reliability centred asset management strategy in a macro coal mining environment

- Botha, Dirk Cornelius Petrus

Authors: Botha, Dirk Cornelius Petrus
Date: 2012-01-16
Subjects: Reliability (Engineering) , Maintainability (Engineering) , Total quality management , Plant maintenance , Coal mines and mining
Type: Thesis
Identifier: uj:1901 , http://hdl.handle.net/10210/4262
Description: M.Phil. , The implementation of a maintenance strategy without taking the uniqueness of the specific business into account, will not necessarily result in a high level of performance. The maintenance function should be developed specifically to support the particular business processes and technology in use. There is presently a large gap between the results obtained through the implementation of the maintenance strategy at a major coal-mining complex and the desired targets to be met. To close the gap, this dissertation suggests that support systems should be implemented to sustain growth and stability. The dissertation specifically proposes the creation of a Central Support Function to support the maintenance strategy, which has been implemented together with the Enterprise Management System (EMS) with the System Application Product (SAP) as an enabler.
Full Text:

Showing items 1 - 5 of 5