Synthesis and characterization of cyclodextrin based chitosan nanoparticles for drug delivery of essential oil
- Authors: Matshetshe, Kabo I.
- Date: 2017
- Subjects: Nanoparticles , Chitosan , Cyclodextrins , Biopolymers , Polymers in medicine
- Language: English
- Type: Masters (Thesis)
- Identifier: http://hdl.handle.net/10210/235801 , uj:24121
- Description: M.Sc. (Nanoscience) , Abstract: The cinnamomum zeylanicum essential oil (CEO) is a plant extract from Cinnamomum zeylanicum Blume species and possess good antimicrobial activity such as anti-bacterial, anti-viral, anti-fungal, anti-parasitical and insecticidal. However, CEO is a volatile compound which easily decomposes upon direct exposure to heat, pressure, light or oxygen, and is also highly insoluble in water. This study reports the encapsulation of cinnamomum zeylanicum essential oil (CEO) in chitosan nanoparticles (CS-NPs) and β-cyclodextrins based chitosan nanoparticles (β-cyclodextrins/CS -NPs) synthesized via an ionic gelation cross-linking method. The as-synthesised CS-NPs and β-cyclodextrins/CS-NPs loaded CEO were characterized using Ultraviolet and visible (UV-vis) spectrophotometry, dynamic light scattering (DLS), Fourier transform infra-red spectroscopy (FTIR), X-ray diffraction spectroscopy (XRD) and High resolution transmission electron Microscopy (HR-TEM). The properties of CEO-loaded β-CD/CS-NPs and CEO-loaded CS-NPs such as the encapsulation efficiency (EE), surface charge, morphology, and in vitro drug release were investigated. At an optimized conditions, the encapsulation efficiency (EE) of CEO-loaded β-CD/CS-NPs and CEO-loaded chitosan nanoparticles were about 58.03 1.13 % and 20.04 %, respectively, when the initial CEO content was 12.5 mg/mg of chitosan. As determined by TEM and DLS, the individual nanoparticles of CEO-loaded β-CD/CS-NPs and CEO-loaded CS-NPs exhibited a spherical shape with an average size distribution of 36.08 11.25 nm and 111.15 27.88 nm, and a positively charged surface with a zeta potential value of 20.73 3.20 and 30.5 0.72 mV, respectively. The in vitro release of CEO from optimized chitosan nanoparticles showed a sustained release, with release amounts of 49...
- Full Text:
- Authors: Matshetshe, Kabo I.
- Date: 2017
- Subjects: Nanoparticles , Chitosan , Cyclodextrins , Biopolymers , Polymers in medicine
- Language: English
- Type: Masters (Thesis)
- Identifier: http://hdl.handle.net/10210/235801 , uj:24121
- Description: M.Sc. (Nanoscience) , Abstract: The cinnamomum zeylanicum essential oil (CEO) is a plant extract from Cinnamomum zeylanicum Blume species and possess good antimicrobial activity such as anti-bacterial, anti-viral, anti-fungal, anti-parasitical and insecticidal. However, CEO is a volatile compound which easily decomposes upon direct exposure to heat, pressure, light or oxygen, and is also highly insoluble in water. This study reports the encapsulation of cinnamomum zeylanicum essential oil (CEO) in chitosan nanoparticles (CS-NPs) and β-cyclodextrins based chitosan nanoparticles (β-cyclodextrins/CS -NPs) synthesized via an ionic gelation cross-linking method. The as-synthesised CS-NPs and β-cyclodextrins/CS-NPs loaded CEO were characterized using Ultraviolet and visible (UV-vis) spectrophotometry, dynamic light scattering (DLS), Fourier transform infra-red spectroscopy (FTIR), X-ray diffraction spectroscopy (XRD) and High resolution transmission electron Microscopy (HR-TEM). The properties of CEO-loaded β-CD/CS-NPs and CEO-loaded CS-NPs such as the encapsulation efficiency (EE), surface charge, morphology, and in vitro drug release were investigated. At an optimized conditions, the encapsulation efficiency (EE) of CEO-loaded β-CD/CS-NPs and CEO-loaded chitosan nanoparticles were about 58.03 1.13 % and 20.04 %, respectively, when the initial CEO content was 12.5 mg/mg of chitosan. As determined by TEM and DLS, the individual nanoparticles of CEO-loaded β-CD/CS-NPs and CEO-loaded CS-NPs exhibited a spherical shape with an average size distribution of 36.08 11.25 nm and 111.15 27.88 nm, and a positively charged surface with a zeta potential value of 20.73 3.20 and 30.5 0.72 mV, respectively. The in vitro release of CEO from optimized chitosan nanoparticles showed a sustained release, with release amounts of 49...
- Full Text:
Greener synthesis of biopolymer-inorganic nanocomposite beads and membranes for use in water purification
- Authors: Masheane, Monaheng Leonard
- Date: 2016
- Subjects: Water - Purification - Membrane filtration , Water - Purification , Nanocomposites (Materials) , Nanotechnology , Biopolymers
- Language: English
- Type: Masters (Thesis)
- Identifier: http://hdl.handle.net/10210/84682 , uj:19251
- Description: Abstract: In South Africa, the unavailability of clean drinking water is a life-threatening problem, especially in the rural areas. Millions of people living in rural areas rely on water directly from the source (surface and groundwater) for drinking, cooking and other domestic purposes without any prior treatment. These sources of water are known to be affected by contaminants from untreated wastewater, industrial effluent, agricultural runoffs and domestic waste. The exposure of humans to these polluted water bodies results in infection and waterborne diseases which sometimes result in death. This has a direct consequence to the productivity of the people living in these communities and has cost implications to the government. This study was aimed at determining the potential pollutants present in drinking water sources in Lochiel, a small community in the Mpumalanga province, eastern part of South Africa, and to develop efficient and cost effective materials (beads and membranes) that could be used in the rural communities to provide safe and clean water for consumption. The application of adsorption materials (e.g. in the form of beads) and filtration materials (e.g. membranes) has attracted great interest in water purification. This is because they have several advantages over the conventional methods. These advantages include but are not limited to low capital and operations costs, low energy requirements (especially when chemically modified) and ease of operation. In this study chitosan (CTs) was chosen to prepare novel and environmentally benign nanocomposite materials either in the form of beads or flat sheet using greener solvents. In an attempt to prepare biopolymer-ceramic nanofiltration composite membranes, small amounts of multiwalled carbon nanotubes (MWCNTs) (5 wt%) and alumina (Al) (20 wt%) were added to CTs in pH controlled aqueous media near room temperature. The resulting nanocomposite was found to readily form insoluble beads... , M.Sc. (Chemistry)
- Full Text:
- Authors: Masheane, Monaheng Leonard
- Date: 2016
- Subjects: Water - Purification - Membrane filtration , Water - Purification , Nanocomposites (Materials) , Nanotechnology , Biopolymers
- Language: English
- Type: Masters (Thesis)
- Identifier: http://hdl.handle.net/10210/84682 , uj:19251
- Description: Abstract: In South Africa, the unavailability of clean drinking water is a life-threatening problem, especially in the rural areas. Millions of people living in rural areas rely on water directly from the source (surface and groundwater) for drinking, cooking and other domestic purposes without any prior treatment. These sources of water are known to be affected by contaminants from untreated wastewater, industrial effluent, agricultural runoffs and domestic waste. The exposure of humans to these polluted water bodies results in infection and waterborne diseases which sometimes result in death. This has a direct consequence to the productivity of the people living in these communities and has cost implications to the government. This study was aimed at determining the potential pollutants present in drinking water sources in Lochiel, a small community in the Mpumalanga province, eastern part of South Africa, and to develop efficient and cost effective materials (beads and membranes) that could be used in the rural communities to provide safe and clean water for consumption. The application of adsorption materials (e.g. in the form of beads) and filtration materials (e.g. membranes) has attracted great interest in water purification. This is because they have several advantages over the conventional methods. These advantages include but are not limited to low capital and operations costs, low energy requirements (especially when chemically modified) and ease of operation. In this study chitosan (CTs) was chosen to prepare novel and environmentally benign nanocomposite materials either in the form of beads or flat sheet using greener solvents. In an attempt to prepare biopolymer-ceramic nanofiltration composite membranes, small amounts of multiwalled carbon nanotubes (MWCNTs) (5 wt%) and alumina (Al) (20 wt%) were added to CTs in pH controlled aqueous media near room temperature. The resulting nanocomposite was found to readily form insoluble beads... , M.Sc. (Chemistry)
- Full Text:
Early transition metal carbides-multiwalled carbon nanotubes-biopolymer nanocomposites in the application of hydrostatic pressure sensor
- Makhado, Bveledzani Pertunia
- Authors: Makhado, Bveledzani Pertunia
- Date: 2019
- Subjects: Pressure transducers , Hydrostatic pressure , Transition metal carbides , Carbon nanotubes , Nanocomposites (Materials) , Biopolymers , Cellulose acetate
- Language: English
- Type: Masters (Thesis)
- Identifier: http://hdl.handle.net/10210/417534 , uj:35364
- Description: Abstract: Pressure sensors are very significant and are used in various areas such as automobiles, aerospace, medical industry, energy storage, corrosion protection, electrochromic devices, electrochemical sensor. Most of the pressure sensors in the market are intended to operate either in the air, dry gases and water-based environments. Environmental interference hampered the pressure sensors effectiveness and life cycle. As a consequence, countless measurement and reading mistakes have been reported owing to interferences such as trapped air in a cylinder and elevated humidity, thus decreasing sensitivity and delaying response time. In this study, we determine the resistance sensitivity of a hydrostatic pressure sensor based on cellulose acetate (CA), alpinumisoflavone (BI), multiwalled carbon nanotubes (MWCNTs) and metal carbides (MC) nanocomposites deposited on integrated electrode. We intended to utilize a cost-effective, simple, fast deposition process and fabrication of thermoplastic polymers nanocomposites for pressure sensing device and to study electrical properties of pressure sensing and stability using LCR meter... , M.Sc. (Nanoscience)
- Full Text:
- Authors: Makhado, Bveledzani Pertunia
- Date: 2019
- Subjects: Pressure transducers , Hydrostatic pressure , Transition metal carbides , Carbon nanotubes , Nanocomposites (Materials) , Biopolymers , Cellulose acetate
- Language: English
- Type: Masters (Thesis)
- Identifier: http://hdl.handle.net/10210/417534 , uj:35364
- Description: Abstract: Pressure sensors are very significant and are used in various areas such as automobiles, aerospace, medical industry, energy storage, corrosion protection, electrochromic devices, electrochemical sensor. Most of the pressure sensors in the market are intended to operate either in the air, dry gases and water-based environments. Environmental interference hampered the pressure sensors effectiveness and life cycle. As a consequence, countless measurement and reading mistakes have been reported owing to interferences such as trapped air in a cylinder and elevated humidity, thus decreasing sensitivity and delaying response time. In this study, we determine the resistance sensitivity of a hydrostatic pressure sensor based on cellulose acetate (CA), alpinumisoflavone (BI), multiwalled carbon nanotubes (MWCNTs) and metal carbides (MC) nanocomposites deposited on integrated electrode. We intended to utilize a cost-effective, simple, fast deposition process and fabrication of thermoplastic polymers nanocomposites for pressure sensing device and to study electrical properties of pressure sensing and stability using LCR meter... , M.Sc. (Nanoscience)
- Full Text:
- «
- ‹
- 1
- ›
- »