Phase equilibrium of volatile organic compounds in silicon oil using the UNIFAC procedure : an estimation
- Muzenda, Edison, Simate, Geoffrey S., Belaid, Mohamed, Ntuli, Freeman, Mollagee, Mansoor
- Authors: Muzenda, Edison , Simate, Geoffrey S. , Belaid, Mohamed , Ntuli, Freeman , Mollagee, Mansoor
- Date: 2011
- Subjects: Phase equilibrium , Thermodynamic models , Volatile organic compounds , Polydimethylsiloxane , Silicon oil
- Type: Article
- Identifier: uj:4699 , http://hdl.handle.net/10210/10934
- Description: This paper focuses on the phase equilibrium of volatile organic compounds in silicon oil chemically known as PDMS (polydimethylsiloxane) at infinite dilution. Measurements can be expensive and time consuming, hence the need for thermodynamic models which allow the calculation of the phase equilibrium behavior using a limited number of experimental data. The objective of this study was to predict infinite dilution activity coefficients of selected VOCs (volatile organic compounds) in PDMS using the Original UNIFAC model. The predicted results show that PDMS can be used to abate volatile organic compounds from contaminated air streams. The results obtained in this work are comparable to those obtained by the same authors through measurements such as the static headspace and the dynamic gas liquid chromatographic techniques as well as other literature. Although the UNIFAC group contribution method over estimate the infinite dilution activity coefficients, the results of this work may be applied in preliminary phases of process design, simulation and feasibility studies.
- Full Text:
- Authors: Muzenda, Edison , Simate, Geoffrey S. , Belaid, Mohamed , Ntuli, Freeman , Mollagee, Mansoor
- Date: 2011
- Subjects: Phase equilibrium , Thermodynamic models , Volatile organic compounds , Polydimethylsiloxane , Silicon oil
- Type: Article
- Identifier: uj:4699 , http://hdl.handle.net/10210/10934
- Description: This paper focuses on the phase equilibrium of volatile organic compounds in silicon oil chemically known as PDMS (polydimethylsiloxane) at infinite dilution. Measurements can be expensive and time consuming, hence the need for thermodynamic models which allow the calculation of the phase equilibrium behavior using a limited number of experimental data. The objective of this study was to predict infinite dilution activity coefficients of selected VOCs (volatile organic compounds) in PDMS using the Original UNIFAC model. The predicted results show that PDMS can be used to abate volatile organic compounds from contaminated air streams. The results obtained in this work are comparable to those obtained by the same authors through measurements such as the static headspace and the dynamic gas liquid chromatographic techniques as well as other literature. Although the UNIFAC group contribution method over estimate the infinite dilution activity coefficients, the results of this work may be applied in preliminary phases of process design, simulation and feasibility studies.
- Full Text:
The effect of zinc ion concentration and pH on the leaching kinetics of calcined zinc oxide ore
- Muzenda, Edison, Simate, Geoffrey S.
- Authors: Muzenda, Edison , Simate, Geoffrey S.
- Date: 2011
- Subjects: Dissolution kinetics , Leaching , Zinc ions , Zinc oxide
- Type: Article
- Identifier: uj:4701 , http://hdl.handle.net/10210/10940
- Description: Previous studies on the dissolution of zinc oxide have concentrated on the effects of temperature, reagent concentration, particle size and agitation rate, among other factors. However, there is dearth data on the effect of a combination of product concentration and pH on leaching rates. This work examines the effects of the concentration of pH and zinc ions on the dissolution kinetics of zinc oxide. The results showed that the rate of zinc dissolution was greatest at lower pHs. This is because at lower pH, the concentration of acid (H+ ions) is also expected to be high (pH = log10[H+]), thus increasing the reaction kinetics in accordance with the kinetic molecular theory. The rate of reaction was found to increase with an increase in the concentration of zinc ions (Zn2+), which is in contrast to established theories. This observation can be explained by the fact that since heat energy produced (via an exothermic reaction) was continuously being dissipated through a constant temperature water bath it favoured zinc oxide dissolution. Zinc oxide ore at 62.5% purity also comprised of other metal oxides (e.g., iron, copper, manganese, etc) which were simultaneously leached. Since the solution was recycled, the concentration of iron, for example, could have also increased. Since zinc is more reactive than iron, two reaction mechanisms could have possibly been occurring at the same time, i.e., the dissolution of zinc oxide ore by sulfuric acid and the displacement of iron in solution by zinc in zinc oxide forming iron hydroxide.
- Full Text:
- Authors: Muzenda, Edison , Simate, Geoffrey S.
- Date: 2011
- Subjects: Dissolution kinetics , Leaching , Zinc ions , Zinc oxide
- Type: Article
- Identifier: uj:4701 , http://hdl.handle.net/10210/10940
- Description: Previous studies on the dissolution of zinc oxide have concentrated on the effects of temperature, reagent concentration, particle size and agitation rate, among other factors. However, there is dearth data on the effect of a combination of product concentration and pH on leaching rates. This work examines the effects of the concentration of pH and zinc ions on the dissolution kinetics of zinc oxide. The results showed that the rate of zinc dissolution was greatest at lower pHs. This is because at lower pH, the concentration of acid (H+ ions) is also expected to be high (pH = log10[H+]), thus increasing the reaction kinetics in accordance with the kinetic molecular theory. The rate of reaction was found to increase with an increase in the concentration of zinc ions (Zn2+), which is in contrast to established theories. This observation can be explained by the fact that since heat energy produced (via an exothermic reaction) was continuously being dissipated through a constant temperature water bath it favoured zinc oxide dissolution. Zinc oxide ore at 62.5% purity also comprised of other metal oxides (e.g., iron, copper, manganese, etc) which were simultaneously leached. Since the solution was recycled, the concentration of iron, for example, could have also increased. Since zinc is more reactive than iron, two reaction mechanisms could have possibly been occurring at the same time, i.e., the dissolution of zinc oxide ore by sulfuric acid and the displacement of iron in solution by zinc in zinc oxide forming iron hydroxide.
- Full Text:
- «
- ‹
- 1
- ›
- »