Formation of major fold types during distinct geological events in the central zone of the Limpopo Belt, South Africa: new structural, metamorphic and geochronologic
- Authors: Boshoff, Rene
- Date: 2009-01-27T07:18:07Z
- Subjects: Geology , Structural geology , Metamorphism (Geology) , Folds (Geology) , Geological time , Limpopo Belt (South Africa)
- Type: Thesis
- Identifier: uj:14827 , http://hdl.handle.net/10210/1951
- Description: M.Sc. , The Limpopo Complex (LC) of southern Africa is one of the best-studied Precambrian granulite facies terrains in the world, yet workers still disagree on fundamental aspects of the geological evolution of this complexly deformed high-grade terrain. Most workers agree that the two marginal zones were exhumed in the late-Archaean, but disagree on the timing of major tectono-metamorphic events that affected the Central Zone (CZ) of Limpopo Belt, and the mechanism/s of its formation. There are currently two main schools of thought: The first school regards the LC as a late-Archaean orogenic zone that resulted from a north-south collision of the Zimbabwe and Kaapvaal cratons. Granitic plutons throughout the entire LC are considered to be accurate time-markers for this orogeny. The second school suggests that the CZ evolved as a result of a major Paleoproterozoic tectono-metamorphic event based mainly on the interpretation of metamorphic mineral ages. The present study focuses on two aims, namely (i) to provide a synthesis of published data as a basis to understand the ongoing age controversy concerning the evolution of the CZ, and (ii) to show that specific fold types in the CZ can be related to either the late-Archaean or the Paleoproterozoic event. New age, structural, metamorphic, and petrographic data are presented to show that (i) major sheath folds reflect the peak tectono-metamorphic event that affected the CZ in the late-Archaean, while (ii) major cross folds developed as a result of a transpressive event in the Paleoproterozoic. The age of formation of the Avoca sheath fold located about 40 km west of Alldays is accurately constrained by the age of emplacement of different structural varieties of precursors to the Singelele Gneiss: penetratively deformed syn- to late-tectonic Singelele gneisses with a zircon SHRIMP age of 2651 ± 8 Ma, date the time of formation of the sheath fold that is characterized by a single population of linear elements that define the central fold axis. The Avoca sheath fold documents top-to-the-NNE movement of material during the exhumation of the high-grade CZ rocks. Weakly foliated late-tectonic L-tectonites with a zircon SHRIMP age of 2626.8 ± 5.4 Ma, outcrop near the centre of the sheath fold, and provide a minimum age for the shear deformation event. An almost undeformed (post-tectonic) variety of the Singelele Gneiss was emplaced after the shear event. A detailed metamorphic study of metapelitic gneisses from the large Baklykraal cross fold, located about 20 km east of the Avoca sheath fold, documents a single decompression-cooling (DC) P-T path for the evolution of this structure. Three studied metapelitic samples characterized by a single generation of garnet provide a Pb-Pb age of 2023 ± 11 Ma, that accurately constrain the time of formation of this major fold to the Paleoproterozoic. A metapelitic sample characterized by two generations of garnet provide a slightly older Pb-Pb age of 2173 ± 79 Ma, that is interpreted to also reflect the late-Archaean event. The Baklykraal cross fold is characterized by two populations of linear elements: the one population defines the shallow N-S oriented fold axes, while the second population is associated with top-to-the-NNE movement of material during exhumation, resulting in folds with a nappe-like geometry. A DC P-T path for the Campbell cross fold (Van Kal, 2004) located just west of Musina, suggests that cross folds developed under significantly lower P-T conditions than is the case with sheath folds, providing an explanation for the lack of significant anatexis associated with the Paleoproterozoic event. The late-Archaean orogeny in contrast, was accompanied by widespread anatexis during a major magmatic event that is characterized by an abnormal high radiogenic signature. This study, for the first time, provides evidence that link specific fold types, and thus deformational events, to different tectono-metamorphic events. The main conclusion is that the CZ was exhumed as the result of two distinct orogenies, one in the late-Archaean, and the other in the Paleoproterozoic.
- Full Text:
The Neoarchaean to Palaeoproterozoic evolution of the polymetamorphic central zone of the Limpopo high-grade terrain in South Africa
Structural-metamorphic studies of distinct fold types related to distinct tectono-metamorphic events in the central zone of the Limpopo Complex, South Africa
- Authors: Van Kal, Shaun Michael
- Date: 2009-01-28T09:43:40Z
- Subjects: Geology , Structural geology , Folds (Geology) , Metamorphism (Geology) , Petrology , Limpopo (South Africa)
- Type: Thesis
- Identifier: uj:14850 , http://hdl.handle.net/10210/1972
- Description: M.Sc. , The Central Zone of the Limpopo Complex displays two major structural features: the roughly east-west oriented Tshipise Straightening Zone Paleoproterozoic in age and a “Cross Folded Zone” to the north of the Straightening Zone comprising large-scale sheath and cross folds suggested to have developed during a Late- Archaean high grade tectono-metamorphic event. This study presents and discusses structural-metamorphic data showing that two closely associated folds (Ga-Tshanzi and Campbell) in the eastern part of the Cross Folded Zone near Musina, record different structural and metamorphic histories that may be applied to the evolution of the entire Central Zone of the Limpopo Complex. The Ga-Tshanzi structure has an ovate-shaped closed outcrop pattern approximately 4km long, and 3km wide with the long axis of the fold pattern oriented in a westerly direction. The fold geometry, characterized by a central fold axis that plunges steeply to the SSW, is very similar to other closed folds in the Central Zone previously interpreted as sheath folds. The Ga-Tshanzi fold deforms rocks of the Beit Bridge Complex (calc-silicate, metaquartzite, metapelite and magnetite quartzite and quartzofeldspathic Singelele Gneiss), and members of the Messina Layered Suite. The ovate structure is characterised by a gneissic fabric comprising peak metamorphic mineral assemblages. This regional gneissic fabric that occurs throughout the Central Zone also defines the shape of the neighbouring Campbell fold. Mineral lineations and fold hinges in the Ga-Tshanzi fold mainly present within metaquartzites and calc-silicates, plunge steeply to the southwest, parallel to its central fold axis indicating a NNE-SSW transport direction during fold formation. A decompression-cooling P-T path calculated for metapelitic gneisses from the Ga-Tshanzi fold shows that the closed fold developed under high-grade, deep crustal conditions. Peak P-T conditions of 7.5kbar/799ºC were followed by decompression and cooling down to 5.23kbar/605ºC. Water activity during this event was low, ranging from 0.122 at peak conditions, and decreasing to 0.037 at the minimum calculated conditions. The Ga-Tshanzi closed fold and the closely associated Campbell cross fold were thus formed at deep crustal levels and partially exhumed along a similar decompression-cooling P-T path to mid-crustal levels during the early orogenic event. The Campbell fold, described as a cross fold in the literature, is approximately 15km long and has a V shaped outcrop pattern that tapers from 12km in the southeast to 2 km in the northwest. This fold is developed in lithologies similar to those of the Ga-Tshanzi fold as well as in Sand River Gneisses. It has a near isoclinal fold geometry with both limbs dipping towards the southwest and a fold axis that plunges moderately to the west-southwest. This fold, that is interpreted to have developed during the same deformational event as the Ga-Tshansi structure has, however, subsequently been affected at mid- to upper crustal levels by shear movement along the Tshipise Straightening Zone displaying widespread development of younger planar and linear structural features. Planar features include north-south-trending high temperature shear zones that crosscut the regional fabric and flexural slip planes particularly evident in quartzites. Linear features from the Campbell fold that are mainly developed in younger shear and flexural slip planes, indicate, in contrast to the Ga-Tshanzi fold, an ENE-WSW directed crustal movement that is in accordance with the sense of movement suggested for the Tshipise Straightening Zone. The calculated decompression-cooling P-T path for sheared metapelitic gneisses from discrete high temperature shear zones deforming rocks of the Campbell cross fold shows that this superimposed shear deformational event occurred under peak P-T conditions of 4.98kbar/681ºC, followed by decompression and cooling down to 3.61kbar/585ºC. Water activity during this shear event was high, ranging from 0.217 at peak conditions and decreases to 0.117 at minimum calculated conditions. Structural and metamorphic data for the two folded areas thus indicate two distinct tectono-metamorphic events: (i) a late Archaean peak metamorphic and deformational event responsible for the formation of the Ga-Tshanzi fold, and similar folds throughout the Central Zone including the Campbell cross fold that was accompanied by steep NNE-SSW transport of crustal material, and (ii) a shear deformational event linked to the Paleoproterozoic Tshipise Straightening Zone that partially obliterated the early structural and metamorphic history of the Campbell fold during mid to upper crustal conditions during relatively shallow ENE-WSW directed movement of crustal material. The fact that this superimposed event had no apparent metamorphic effect on the studied metapelitic rocks of the closely associated Ga-Tshanzi closed fold, suggests that shearing was constrained to discrete north-south orientated zones.
- Full Text:
Metamorfose : die sleutel tot die herkenning van oer gebiede van bergbouing
- Authors: Van Reenen, D. D.
- Date: 2009-11-16T06:15:02Z
- Subjects: Metamorphism (Geology) , Metamorphic rock formations
- Type: Inaugural
- Identifier: uj:15066 , http://hdl.handle.net/10210/2988
- Description: Inaugural lecture--Department of Geology, Rand Afrikaans University, 19 May 1988 , In the last twenty years, the study of metamorphism has undergone a major shift of emphasis: from a descriptive to a more quantitative approach aimed at identifying the intensive thermodynamic variables (P, T and X) which controlled the process of metamorphism. The quantitative study of metamorphism comprises experimental phase-chemical studies, thermodynamic calculations and the study of metamorphic mineral assemblages by means of the electron microprobe. Consequently, the metamorphic petrologist today is capable of calculating accurately the distribution of temperature and pressure in the earth's crust with time within approximately 50°C and a few hundred bars. This makes it possible for him to examine, from a quantitative point of view, the continuous adjustment (that is, the submersion, heating and consequent elevation, erosion and cooling = PoT-time loops) of rock masses under changing physical conditions. Since the mineralogical and chemical composition, fabric and field-relations of metamorphic rock formations are a reflection of the underlying geological processes which played a role in the evolution of the earth's crust, metamorphism may thus be regarded as the key to identifying primordial areas of mountain formation. The chemographic analysis of phase-relations in metamorphic rock formations and the identification of continuous and discontinuous metamorphic reactions form the basis for the construction of petrogenetic diagrams by means of which different p-T loops may be deduced. These loops are then used to make deductions concerning the underlying geological processes. The study of metamorphism is, however, not simply an interesting geological exercise, but the information gained from this type of examination plays an important role in the establishment of models of exploration which are used by mining companies to locate ore deposits in complex metamorphic areas.
- Full Text: