Dry-out CHF correlation for R134a flow boiling in a horizontal helically-coiled tube
- Authors: Chen, C.-N. , Han, J.-T. , Jen, T.-C. , Shao, L.
- Date: 2011
- Subjects: Critical heat flux , Helically coiled tubes , Heat transfer
- Type: Article
- Identifier: uj:5286 , http://hdl.handle.net/10210/14955
- Description: An experimental study was carried out to investigate the R134a dry-out critical heat flux (CHF) characteristics in a horizontal helically-coiled tube. The test section was heated uniformly by DC high-power source, and its geometrical parameters are the outer diameter of 10 mm, inner diameter of 8.4 mm, coil diameter of 300 mm, helical pitch of 75 mm and valid heated length of 1.89 m. The experimental parameters are the outlet pressures of 0.30–0.95 MPa, mass fluxes of 60–500 kg m 2 s 1, inlet qualities of 0.36–0.35 and heat fluxes of 7.0 103–5.0 104 Wm 2. A method based on Agilent BenchLink Data Logger Pro was developed to determine the occurrence of CHF with a total of 68 T-type thermocouples (0.2 mm) set along the tube for accurate temperature measurement. The characteristics of wall temperatures and the parametric effect on dry-out CHF showed that temperature would jump abruptly at the point of CHF, which usually started to form at the front and offside (270 and 90 ) of the outlet crosssection. The CHF values decrease nearly linearly with increasing inlet qualities, while they decrease more acutely with increasing critical qualities, especially under larger mass flux conditions. The mass flux has a positive effect on CHF enhancement, but the pressure has negative one. A new dimensionless correlation was developed to estimate dry-out CHF of R134a flow boiling in horizontal helically-coiled tubes under current experimental conditions and compared to calculated results from Bowring and Shah correlations.
- Full Text:
Experimental study on critical heat flux characteristics of R134a flow boiling in horizontal helically-coiled tubes
- Authors: Chen, Chang-Nian , Han, Ji-Tian , Jen, Tien-Chien , Shao, Li , Chen, Wen-wen
- Date: 2011
- Subjects: Critical heat flux , Helically coiled tubes , Heat transfer
- Type: Article
- Identifier: uj:5284 , http://hdl.handle.net/10210/14953
- Description: Critical heat flux (CHF) experiments were performed to study the R134a CHF characteristics in horizontal helically-coiled tubes. The stainless steel test sections were heated uniformly, with tube inner diameters of 3.8e11 mm, coil diameters of 135e370 mm, helical pitches of 40e105 mm and heated lengths of 0.85e7.54 m. The experimental conditions are pressures of 0.30e1.10 MPa, mass fluxes of 60e480 kg m 2 s 1, inlet qualities of 0.32e0.36 and heat fluxes of 6.0 103e9.0 104Wm 2. It was found that the wall temperatures jumped abruptly once the CHF occurred. The CHF values decrease with increasing heated lengths, coil diameters and inner diameters, but the DNB (departure from nucleate boiling) CHF seems independent when length-to-diameter L/di> 200. The coil-to-diameter ratios are more important than length-to-diameter ratios for CHF in helically-coiled tubes, while the helical pitches have little effect on CHF. The CHF value increases greatly with increasing mass flux and decreases smoothly with increasing pressure. It decreases nearly linearly with increasing inlet and critical qualities, but it varies more acutely at xcr< 0.5 than higher critical qualities. New correlations for R134a flow boiling CHF in horizontal helically-coiled tubes were developed for applications.
- Full Text: