Flexural failure modes of steel plate-strengthened reinforced concrete elements
- Authors: Olajumoke, Akinropo Musiliu , Dundu, Morgan
- Date: 2014
- Subjects: Reinforced concrete , Composite materials - Bonding - Congresses , Concrete beams - Maintenance and repair , Plates, Iron and steel
- Type: Article
- Identifier: uj:5071 , ISBN 9781614994657 , ISBN 9781614994664 , http://hdl.handle.net/10210/13642
- Description: Failure of plate strengthened flexural reinforced concrete (RC) member can be crushing of the concrete at the compression face or premature debonding of the plate from the concrete element at the tension face. Debonding can be classified into three groups; namely, intermediate crack debonding (ICD), delamination and plate-end debonding (PED). Intermediate crack debonding is caused by flexural or flexural-shear stress, and plate-end debonding and delamination are caused by interfacial stress. This paper reviews the failure modes of flexural strengthened RC elements in bending, using epoxy-bonded steel plates. It also attempts to establish the width-to-thickness ratios of plates that can achieve the full flexural strengths of the strengthened element and promote a ductile failure.
- Full Text:
Methods for flexural strengthening of reinforced concrete elements using steel plates
- Authors: Olajumoke, Akinropo Musiliu , Dundu, Morgan
- Date: 2014
- Subjects: Concrete beams , Plates, Iron and steel , Reinforced concrete , Flexure
- Type: Article
- Identifier: http://ujcontent.uj.ac.za8080/10210/380017 , uj:5078 , ISBN 9781614994657 , ISBN 9781614994664 , http://hdl.handle.net/10210/13649
- Description: When reinforced concrete elements are incapable of safely sustaining the anticipated load, flexural strengthening may be necessary. Two major construction methods have been reported in literature for strengthening reinforced concrete (RC) elements in bending. These methods include Externally Bonded Reinforcement (EBR) and Near Surface Mounting (NSM). The aim of this paper is review these methods, including the extensive surface preparation that must be performed on bonded elements. Previous investigations have shown that these techniques are effective in salvaging old and distressed reinforced concrete structures. This paper identifies the problems associated with the utilisation of steel plates as strengthening material for RC elements in EBR and NSM techniques.
- Full Text: