Abstract
The aim of this study is to determine the optimal combination of process parameters when machining commercially pure titanium grade 2. The unification of Multi objective optimization based on ratio analysis (MOORA) and fuzzy approach has applied to optimize the process parameters. Three process parameters i.e. cutting speed, tool overhang, and microhardness have been varied at three levels each and a total of twenty seven experiments have been conducted based on Taguchi’s L27 design of experiment technique. Cutting force, tool flank wear, and average surface roughness have been considered a machinability indicators to measure the process performance. Feed rate and depth of cut have been kept constant. Successful optimization is done and results show that machining titanium at higher cutting speed (140 m/min) and higher tool overhang length (65 mm) with medium hardness (1934 HV) results in lower cutting force, tool flank wear, and surface roughness. Outcomes of the present work reveal that the hybrid fuzzy-MOORA method is convincing enough to obtain the best process parameter combination for the best machinability while machining titanium type difficult-to-machine materials.