Abstract
The World Health Organisation has recommended strict permissible limits for cadmium(II) in drinking water owing to the harmful threats it poses to humans and the environment. As a result, strict monitoring of cadmium(II) is a necessity. This dissertation reports on the design of monitoring tools referred to as electrochemical aptamer biosensors (aptasensors) based on nano-platforms for selective detection of Cd(II) in water. Nanomaterials such as carbon black, gold nanoparticles and carbon nanofibres were the smart materials of choice used in the fabrication of electrode supports for enhancement of detection signals. A screen-printed electrode was modified using carbon black following the dropcoating technique and then gold nanoparticles were electrodeposited by cyclic voltammetry (CV) at 50 mVs-1 in a potential window of -400 mV to 1100 mV. A thiolated single stranded DNA aptamer was immobilised on the nano-platform via a Au-S covalent linkage. The aptasensor was characterised using CV and electrochemical impedance spectroscopy ((EIS). The designed electrochemical aptasensor selectively detected Cd(II) using the square wave voltammetry (SWV) technique with a detection limit (LOD) of 0.14 ppb in the presence of interferents like chromium, copper and other ions. The second electrochemical aptasensor was based on the fabrication of a screen-printed electrode using acid treated carbon nanofibres. The characterisation procedure was similar with the first aptasensor and upon application, the aptasensor was found to be selective towards Cd(II) detection. A detection limit of 0.11 ppb was obtained using SWV and the aptasensor. Both the aptasensor findings were validated with inductively coupled plasma optical emission spectroscopy (ICP-OES) which showed an LOD of 1.4 ppb. Both electrochemical aptasensor provide a cost effective approach for the mitigation of interferences during electrochemical detection of Cd(II) and they can be applied in the monitoring of Cd(II) in environmental samples.
M.Sc. (Chemistry)